I'm on the search for some track day wheels. can someone confirm the PCD and required offset for a Plus 8? Its a 1988 model if that's important (and using a BTR axle).
Is the stud pattern shared witha ny other makes, i.e Ford?
Plus 8 wheel pcd and ET
-
- Posts: 13
- Joined: Thu Jan 06, 2011 4:27 pm
- Anti spam question: MSA
-
- Posts: 90
- Joined: Sun May 11, 2008 7:20 pm
Re: Plus 8 wheel pcd and ET
Mike, Don't know but Brian at Techniques / Chas at MogSport will no doubt be able to advise.
- Andy Green
- Morgan Class B
- Posts: 1635
- Joined: Fri Jan 21, 2005 5:32 pm
Re: Plus 8 wheel pcd and ET
Mike
If you need to buy some wheels then IMAGE 3 piece are the best and IMAGE have all the information (and lots of styles to choose)
If you need to buy some wheels then IMAGE 3 piece are the best and IMAGE have all the information (and lots of styles to choose)
-
- Posts: 864
- Joined: Fri Nov 17, 2006 8:37 pm
Re: Plus 8 wheel pcd and ET
Andy,
We are lambing at present, so i have an excuse for being up early
wot is your excuse?
We are lambing at present, so i have an excuse for being up early
wot is your excuse?
peter
- Andy Green
- Morgan Class B
- Posts: 1635
- Joined: Fri Jan 21, 2005 5:32 pm
Re: Plus 8 wheel pcd and ET
Peter
I am in Dubai,4 hours time change
I am in Dubai,4 hours time change
-
- Posts: 355
- Joined: Mon Jan 24, 2005 6:01 pm
Re: Plus 8 wheel pcd and ET
Mike
I think you will find that the Morgan +8 5 stud wheels have a PCD of 127mm am not sure of the inset/offset. I will have another dig through all my info papers, according to my records 127mm wheels were fitted to the following
Sherpa K2 & 2.8 Van - 14"
Rover SD1 - 14"
Austin Taxi - 16"
so not a lot of choice!!!
Barry
I think you will find that the Morgan +8 5 stud wheels have a PCD of 127mm am not sure of the inset/offset. I will have another dig through all my info papers, according to my records 127mm wheels were fitted to the following
Sherpa K2 & 2.8 Van - 14"
Rover SD1 - 14"
Austin Taxi - 16"
so not a lot of choice!!!
Barry
-
- Posts: 530
- Joined: Sat Feb 18, 2006 10:18 pm
Re: Plus 8 wheel pcd and ET
Morris / Austin 1800 (landcrab) had the same pcd I think
-
- Posts: 13
- Joined: Thu Jan 06, 2011 4:27 pm
- Anti spam question: MSA
Re: Plus 8 wheel pcd and ET
Thanks all, very helpfull and should help me sort my problem out.
Mike
Mike