Help! My 4/4 with a stage 3 Kent engine is blowing oil all over the engine. I think it is coming from the dipstick mount and the cabin fills with smoke as the oil burns off. The garage are stumped and say the pressure on all 4 cylinders is too low. The oil gauge is showing normal pressure and the car is not running hot. I neeed to drive it at Cadwell in 6 days and an worried it will n ot be ready. Any tips from Kent owners?
John
Ford Kent blowing oil
-
- Posts: 719
- Joined: Mon Jan 15, 2007 3:03 am
Ford Kent blowing oil
Morgan Club Sport. The only way to drive to and from races!
- Richard Smith
- Posts: 483
- Joined: Sun May 15, 2005 3:45 pm
- Location: Unstone Green, Derbyshire
- Contact:
dipstick mount
John,
Have you checked that the oil filler cap breather is clear?
Check the spark plug threads to see if there is oil on them: that might point to worn piston rings. Have you checked with previous owner?
Hope you make Cadwell,
Have you checked that the oil filler cap breather is clear?
Check the spark plug threads to see if there is oil on them: that might point to worn piston rings. Have you checked with previous owner?
Hope you make Cadwell,
Richard Smith
Unstone Green, Derbyshire
1993 4/4 1.6efi MSCC 11823
Unstone Green, Derbyshire
1993 4/4 1.6efi MSCC 11823