trailer bed
- Richard Smith
- Posts: 483
- Joined: Sun May 15, 2005 3:45 pm
- Location: Unstone Green, Derbyshire
- Contact:
trailer bed
I need to replace the trailer bed: originally was that expanded steel mesh stuff, I covered it over with concrete shuttering ply wood, which is now not very good. Any suggestions please?
Richard Smith
Unstone Green, Derbyshire
1993 4/4 1.6efi MSCC 11823
Unstone Green, Derbyshire
1993 4/4 1.6efi MSCC 11823
Re: trailer bed
Hi Richard
Try Suredeck.
http://www.nonslipshop.co.uk/page.asp?id=suredeck
It is a non slip, resin impregnated plywood. Available in different thickness'. I used 9mm for the new floorboards in Millie. I liked the non slip aspect and it looks like carbon fibre if you paint it black
Cheers
Try Suredeck.
http://www.nonslipshop.co.uk/page.asp?id=suredeck
It is a non slip, resin impregnated plywood. Available in different thickness'. I used 9mm for the new floorboards in Millie. I liked the non slip aspect and it looks like carbon fibre if you paint it black
Cheers
- Richard Smith
- Posts: 483
- Joined: Sun May 15, 2005 3:45 pm
- Location: Unstone Green, Derbyshire
- Contact:
Re: trailer bed
Thanks Tim, looks like a helpful website, cheers.
Richard Smith
Unstone Green, Derbyshire
1993 4/4 1.6efi MSCC 11823
Unstone Green, Derbyshire
1993 4/4 1.6efi MSCC 11823
- Richard Smith
- Posts: 483
- Joined: Sun May 15, 2005 3:45 pm
- Location: Unstone Green, Derbyshire
- Contact:
Re: trailer bed
Hmmm, having just loaded the Mog onto the trailer for tomorrow's Debden sprint, maybe re-bedding is a bit more urgent! Good job I left the expanded steel stuff in place!
Richard Smith
Unstone Green, Derbyshire
1993 4/4 1.6efi MSCC 11823
Unstone Green, Derbyshire
1993 4/4 1.6efi MSCC 11823
- Mike Hughes
- Posts: 79
- Joined: Sun May 17, 2009 8:47 am
- Anti spam question: MSA
- Location: Odiham, Hampshire
- Contact:
Re: trailer bed
Hi Richard,
I used an 8' by 4' sheet of aluminium 5-bar tread plate that when cut fitted mine perfectly.
Just over £100 if recall.
Rgds
Mike
I used an 8' by 4' sheet of aluminium 5-bar tread plate that when cut fitted mine perfectly.
Just over £100 if recall.
Rgds
Mike
Mike Hughes
- Richard Smith
- Posts: 483
- Joined: Sun May 15, 2005 3:45 pm
- Location: Unstone Green, Derbyshire
- Contact:
Re: trailer bed
Thanks Mike, I've been to busy to do anything lately!
Richard Smith
Unstone Green, Derbyshire
1993 4/4 1.6efi MSCC 11823
Unstone Green, Derbyshire
1993 4/4 1.6efi MSCC 11823